.jpg "New Project (15).jpg")
| Article Picture | Article Name | Specification/Application |
|
Shaft with Disc Weldment
|
EN8D Induction Hardened
|
|
Coupler
|
EN8, Toughened used in tractor lift
|
|
Idler gear shaft
|
Material SAE 8620 Carburized
|
|
Threaded Export Pin
|
|
|
Pin
|
EN8 Toughened and Induction hardened Bonnet pin of tractor
|
|
Bush
|
Ø30 to Ø70, Material EN353/EN8D Heat Treated |
|
Washer
|
MS Carburized
|
|
Coupler Plate
|
Material EN8D, Toughened, Used in lift of tractor
|
|
Cross For Exports
|
Mat 4340 Process Toughened Application Trucks/4 Wheeler |
|
Cross For Exports
|
Mat SAE8620/En353 Process Case Hardened/ Carburized Application Tractor- Swaraj M&M, Sonalika
|
|
Nut Stearing Knuckle (In pic – M30 x 1.0)
|
Raw Material – Plain carbon Steel (C45) /Toughened Finish – Blackodizing
|
|
Chuck Nut (In pic – M80 x 2.0)
|
Common Sizes -M30 x 1.5, M56 x 2.0 , M80 x 2.0 Raw Material – Plain carbon Steel (C45) Finish – Galvanized / Zinc plated (yellow) / Blackodizing |
|
Nut Lock Bearing (In pic – M60 x 1.5)
|
Raw Material – Plain carbon Steel (C45) Hardened Finish – Zinc plated (yellow) |
|
Adjusting Screw (In pic – M48 x 2.0) | Raw Material – Carbon Steel (forgings) – EN43B – Toughened to 25-30 HRC Finish – Zinc plated (yellow) Application – Tractor lift assembly |
|
Hydraulic Nipple
|
Raw Material – Plain carbon Steel (C45) Finish – Zinc plated (yellow) |
| General Pins (Automobiles) | |
|---|---|
| 1 | Pin Ø20 – 50mm |
| 2 | Length 100mm- 500mm |
| 3 | Steel Low carbon Steel/High Carbon Steel/ Alloy Steel/ Medium Carbon steel |
| 4 | Metallurgical Soft condition |
| – | – Hardened tempered state |
| – | Case Hardening/Carburized |
| – | Carbo Nutriding Small Component (for weight less than 500gms) |
| – | Induction Hardened condition |
| 5 | Surface Treatment |
| – | Zinc Plating (Yellow/White) |
| – | Blackodizing |
| 6 | Application |
| – | Trailer/Tractor/Truck Pins |
| – | Sheet Metal (Bonnet-Hinge Pinn) |
| – | Lift Pins 10-15 types |
| – | Engine Pins Different Pins |
| – | Piston Pins |
| – | Pivot Pins for front tyres Various types |
| JCB Pins | |
|---|---|
| 1 | Dia 45-60mm |
| 2 | Length 150mm to 500mm |
| 3 | Material EN18/EN19 |
| 4 | Heat Treatment |
| – | Touchened Condition |
| – | Induvtion Hardened at specified area |
